Vertical machining center high speed cutting. When the vertical machining center is at high speed, the tool workpiece can be kept at low temperature, which can extend the service life of the tool in many cases. On the other hand, in high-speed cutting. The time for the tip is very short. This means that feed time is shorter than calories. Low cutting force makes tool bending small consistent. This combination with the inventory required for each tool process is one of the prerequisites for safe handling. Because of the small cutting depth the small radial force of the tool spindle in the high-speed cutting of Yiming CNC engraving machine, the wear of spindle bearing, guide rail ball screw is reduced. High speed cutting axial milling are also a good combination, which has little effect on the spindle bearing. In this way, one way you can use a longer tool with little risk of vibration. High efficiency cutting of small size parts. For example, in the process of roughing, semi finishing finishing, when the total material removal rate is low, the economy is better. High precision machining efficiency good surface quality can be obtained by high speed cutting. High speed machining is used in the vertical machining center. Because of the short feeding time, the impact deformation of the thin wall are reduced.

It is convenient fast to improve the geometric accuracy of the mould. High speed cutting can obtain good surface texture geometric accuracy. If more time is spent on cutting, the time of manual polishing can be significantly reduced.

The vertical machining center adopts high-speed cutting, which can greatly reduce the quenching, electrolysis other processing technologies. This reduces investment costs simplifies logistics. The durability, tool life die quality are improved by cutting instead of turbine.

The above is the high-speed cutting of vertical machining center. The main products are: Yiming carving milling machine drilling machine, parts processing center, mold processing center, milling machine, high gloss machine, glass engraving machine, cleaning machine, lathe, large gantry milling center, etc.

CNC machine tool gantry CNC machining center is an automatic machine with high precision high efficiency. It can complete the production processing of product workpiece through clamping for several times, reasonably prevent the deviation of tool setting after clamping several times, can also improve the accuracy

Production processing efficiency. The more precise the CNC machine tool is, the more stringent the regulations on installation environment, temperature, humidity vibration of CNC machining center, which must be taken into account

Provisions for installation of subgrade.

The installation of Longmen subgrade must be firm, according to the actual subgrade engineering drawings of the manufacturer to make the subgrade. For the pavement with relatively compact concrete, if it is sufficiently strong, the foundation screws can be carried out immediately according to the engineering drawings

For loose pavement, foundation pit excavation must be carried out again according to the subgrade drawing. In addition, the concrete with sufficient thickness is poured to avoid the downward movement of the CNC machining center in the middle later stages, there is no precision in reducing the deformation of the back bed. Made Subgrade

The specification can be lower than the size of the total support point area of the long [J CNC machining center, the construction thickness of subgrade concrete engineering must be in accordance with the national industry standards.

Longmen CNC machining center is the production processing of large medium-sized products, the workpiece is very easy to cause vibration. The heavier the Dragon CNC machining center, the thicker the subgrade needs to be. The bottom pressure of concrete is 1800 n / m2, the compressive strength is 180 n / m2

The bearing compressive strength of the pavement should be more than 5 tons per square meter. There should be no gap in the concrete subgrade. The anti-seismic raw materials should be added to the subgrade production workshop.